30AMP ESC XT60 30A Deans XT30 brushless FPV Drone RC Plane helicopter Timesav

Description

Welcome To the new Listing, Over the course of the next few weeks, I will be updating the listings to make it easier for you to find what your looking for.  Thank you. And if you have any questions, please don't hesitate to reach out.
30AMP ESC Simonk 30A Brushless ESC Firmware for For FPV Drone RC Plane RC Helicopter ERC Timesav. Condition is New. Shipped with USPS First Class.
Features
High performance 30A ESC, suitable for FPV drones or airplane and scratch builds
Low voltage protection mode, low pressure protection threshold.
Safe power function: regardless of the throttle stick in any position, the motor will not start immediately.
Throttle calibration function: adapt to different remote throttle travel difference, improve throttle response linearity, with a smooth, delicate feel and excellent speed linear speed.
Banana type plug and T-plug have been soldered.
You pick your connection,  available is XT60, Deans both with 3.5mm Banana Plugs and now for the mini builds XT30 with 2.0mm banana Plugs
Specifications
Material: Plastic, Metal
Color: As Picture Shown
Weight: 34g
Size: approx. 55*25mm/2.2*1 inch
Type: RC Parts and Accessories
Firmware: Simonk
Power Input: 7-12.6V(2-3S Li-Poly, or 5-12S Ni-MH Ni-MH/Ni-Cd)
BEC: 2A
Continuous Current: 30A(40A for 10 seconds)
Package Included:
1* 30A Brushless ESC
Note:
Do not use this ESC on any high current or high pressure aircraft, otherwise it will burn out ESC.
Can be used on some rc airboats, rc helicopters, rc motorcycles electronic speed control for rc vehicle or rc airship rc drone
Brushless Speed Controller Fixed Wing and Helicopter ESC Robotics Engineering
Yellow ESC Programming Guide 30a and 40a
with your transmitter on and the prop removed from the motor, start with your throttle all the way up, then plug in the battery to the esc you will hear a series of music and beeps
when you first plug the battery in you will hear a tritone followed by two beep, this states everything is ok, continue to wait and you will hear the musical 5 notes when you enter the menu now you can adjust the programing
1) beep  is brake setting, lower throttle to enter this and it will beep once for off and twice for on, to select on or off raise throttle to full position you will here musical town and esc will arm
2) beep beep is battery type,  liop one beep, ni-xx two beeps
3) beep beep beep is Cut off type, one beep soft cut, two beep hard cut off
4) beep beep beep beep is voltage cut out, one beep is low, two is middle and three is high
5) Long Beep start mode - one beep normal start, two beeps soft start, three beeps very soft start
6) long beep -beep timming mode one beep low, two beeps mid, three beeps high timing
to select lower throttle listen for the beeps you want then raise throttle it will musically accept and then lower throttle to arm the esc
7) long beep - beep -beep music selection but does nothing unless you have a program card
8) long beep -long beep govoner mode - does nothing without program card,
governor
is set to off.